Bracket parts are very easily assembled and adjusted.
A backing nut and lock washer strengthens the carriage bolt and ensures
long term rigidity and resistance to movement.
A pre-positioned cable tie secures the banner to the bracket.

A pre-positioned cable tie secures the banner to the base of the arm assembly.
The black nylon cable tie resists degradation by ultraviolet light, and lasts much longer than a clear tie.
Changing banners is a snap. The ties are easily replaceable, and are available from Banner Man or most home supply stores.

Our pole sign brackets hold 24" rigid signs up to 60" tall.
We custom build models for 4"- 5"- 6" square poles.
Shown here: 4 Arm Assemblies Model AAS425S-1X26CH on a 4" square post with 24" x 48" Dibond rigid signs.

We stock brackets which fit 4", 5" and 6" square poles.
All sizes are available in single-banner and double-banner sets.
We can custom build to fit any size pole

Double-banner sets consist of four arm assemblies, bolted back-to-back in pairs.
We stock arm assemblies for 3", 4", 5", and 6" round/octagonal poles, and for 4", 5", and 6" square poles.
Other sizes fabricated on request.

Our brackets for decorative fluted poles are epoxy powder coated in 20% gloss black.
Our bolt-on system is very easy to install and adjust.
Parts can be mixed-and-matched to make up single or double banner sets.

Banner Man Pole Banner Brackets are designed to withstand typical weather, especially wind.
Where the lamp post is larger than normal at mounting heights, a wider baseplate is needed.
For that situation we make a double-bolt model which ensures that the system will stay in place and not move.
Shown here is a system which was installed in 2015 and still looks perfect.

Most of our arm assembly models rotate to perfectly mount a banner on a wooden utility pole.
5/16" x 3" lag bolts ensure a secure grip on the pole.
Shown here: Arm Assembly Model AAS650R-1x32 holding a 30" x 60" banner.

Our brackets mount easily on wooden poles with the use of an impact wrench.
Shown here: Arm Assembly Model AAS525S-1x32 holding a 30" x 60" banner.

Our standard wall mount brackets were selected to display banners
as the primary signage for this sign business.

Our sturdy wall banner brackets hold firm when the urban wind blows

A single arm assembly and baseplate support
a decorative pennant banner mounted on a fluted pole.